| View previous topic :: View next topic |
| Author |
Message |
wlcina
neophyte
Joined: 30 Jun 2009
Posts: 20
|
 Posted: Mon Aug 17, 2009 9:03 am Post subject: |
 |
|
Hello, the link for mldonkey 3.0 for my machine is not working, could you please paste me new link ? (sorry, I deleted that file from my local machine)
I will try to update my machine via the libra file (will replace the original file with newest and try to update machine) |
|
| Back to top |
|
 |
PaulCollins
neophyte
Joined: 16 Aug 2009
Posts: 1
|
| Posted: Thu Sep 03, 2009 4:05 pm Post subject: |
|
|
| wlcina wrote: | Hello, the link for mldonkey 3.0 for my machine is not working, could you please paste me new link ? (sorry, I deleted that file from my local machine)
I will try to update my machine via the libra file (will replace the original file with newest and try to update machine) |
I'm in the same boat. I have a similar device to yours and still running 2.8.2 and no clear method to upgrade other than trying a libra rename, but hoping to find the 3.0 compile. |
|
| Back to top |
|
|
fabtar
Sage
Joined: 04 Feb 2004
Posts: 1399
Location: Italy
|
|
| Back to top |
|
|
wlcina
neophyte
Joined: 30 Jun 2009
Posts: 20
|
| Posted: Thu Sep 17, 2009 10:40 am Post subject: |
|
|
I am getting tired of that damn device  , it seems to have no way to update it |
|
| Back to top |
|
|
asgard
neophyte
Joined: 10 Sep 2007
Posts: 30
|
| Posted: Sat Sep 19, 2009 7:34 am Post subject: |
|
|
| wlcina wrote: | | I am getting tired of that damn device , it seems to have no way to update it |
Well, you can always give it to someone (me, for example) 
Ok, my last offer to help you out. If you're able to configure your NAS for remote access (ie. do the necessary port-forwarding on router), I can remote in and do the setup for you. PM me with the info. |
|
| Back to top |
|
|
wlcina
neophyte
Joined: 30 Jun 2009
Posts: 20
|
| Posted: Sun Sep 20, 2009 7:37 pm Post subject: |
|
|
| Hello, I just have access to web interface, this device seems to have no any telnet |
|
| Back to top |
|
|
asgard
neophyte
Joined: 10 Sep 2007
Posts: 30
|
| Posted: Mon Sep 21, 2009 2:08 am Post subject: |
|
|
| wlcina wrote: | | Hello, I just have access to web interface, this device seems to have no any telnet |
I knew that, web access is all I need, use port 8080 if your ISP block port 80. Anyway, it's up to you. |
|
| Back to top |
|
|
asgard
neophyte
Joined: 10 Sep 2007
Posts: 30
|
| Posted: Mon Sep 21, 2009 8:41 am Post subject: |
|
|
@wlcina, now I understand your frustration, the NAS firmware is buggy and seem to prefer certain web browser (IE) when dealing with FWE updating.
Let me know if you need further assistance. |
|
| Back to top |
|
|
wlcina
neophyte
Joined: 30 Jun 2009
Posts: 20
|
| Posted: Mon Sep 21, 2009 9:16 am Post subject: |
|
|
TY SO MUCH !!! YOU DID IT!  I DONT KNOW HOW, BUT YOU DID!
btway, I have one more question/ proposal, is possible to install telnet (dropbear) or something which allows me to telnet to device ?
or is it risky?
You did something I thought it is not possible   TY |
|
| Back to top |
|
|
asgard
neophyte
Joined: 10 Sep 2007
Posts: 30
|
| Posted: Mon Sep 21, 2009 9:48 am Post subject: |
|
|
You are most welcome, grad to be of help.
Installing telnetd (or dropbear) shouldn't be too difficult but first I need to figure out what boot-up script is used. Also you need to port-forward the default port (23 for telnet and 22 for SSH) so that I can do verify it's working from remote. PM me when you're ready. |
|
| Back to top |
|
|
titanxl
neophyte
Joined: 05 Nov 2009
Posts: 2
|
| Posted: Thu Nov 05, 2009 5:37 pm Post subject: |
|
|
| Have you been able to successfully install telnet or ssh on this? I have a similar device and I'd like to be able to modify some of the configurations for ushare, but have no way to access the config files. Thanks in advance for any help you can provide. |
|
| Back to top |
|
|
asgard
neophyte
Joined: 10 Sep 2007
Posts: 30
|
| Posted: Sun Nov 08, 2009 1:50 pm Post subject: |
|
|
| titanxl wrote: | | Have you been able to successfully install telnet or ssh on this? I have a similar device and I'd like to be able to modify some of the configurations for ushare, but have no way to access the config files. Thanks in advance for any help you can provide. |
Yes, have setup telnet for user wlcina.
You did not state what type of NAS you have so I can't say if I'm able to the same. FYI, I'm and a friend are in the process of setting up a forum site to share info on related NAS. Meanwhile you can visit the older site for reference - nas01g.phpbbserver.com |
|
| Back to top |
|
|
titanxl
neophyte
Joined: 05 Nov 2009
Posts: 2
|
| Posted: Sun Nov 08, 2009 9:49 pm Post subject: |
|
|
Thanks for the reply. The NAS I have is simply called the Gigabit NAS Landisk. I honestly don't even remember where I bought it, but I believe I have tracked down the manufacturer of it. It's the GS-349S.
http://www.a-tecsubsystem.com/websys/atec/web/products.jsp?prodId=1203386241187
It uses the same embedded linux os that wlcina described with the same "firmware extensions" etc. The only thing that may be different is the logo on the web interface. All the same functionality exitis. |
|
| Back to top |
|
|
asgard
neophyte
Joined: 10 Sep 2007
Posts: 30
|
| Posted: Mon Nov 09, 2009 1:28 am Post subject: |
|
|
@titanxi, your is the same as wlcina.
If you're able to configure your NAS for remote access (ie. do the necessary port-forwarding on router), I can remote in and do the setup for you.
PM me with the info. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
