MLDonkey Forum Index
Homepage •  Bugs •  Tasks •  Patches •  SF.net Project Page •  ChangeLog •  German forum •  Links •  Wiki •  Downloads
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 
incoming directory problem

 
Post new topic   Reply to topic    MLDonkey Forum Index -> General Discussion
View previous topic :: View next topic  
Author Message
msuluhan
neophyte


Joined: 07 Mar 2011
Posts: 7

PostPosted: Thu May 01, 2014 6:55 pm    Post subject: incoming directory problem Reply with quote

Hello

I installed mldonkey into Rasperry (Rasperry Debian 7.2). You know Rasperry working from SD card so downloading files and saving into SD card is not useful

So my plan is to use my USB disk for temporary and downloaded files.
I changed temp_directory option to use my USB disk. It looks like ok. (could not try it yet)

But when I tried to change downloaded files' directory I failed. My plan is not working, You could see the final config in following screenshot



How can I set my USB disk for all incoming directory option ?

Best Regards
Back to top
View user's profile Send private message
testerprivate
neophyte


Joined: 30 Jul 2012
Posts: 15

PostPosted: Fri May 02, 2014 3:58 am    Post subject: Reply with quote

that's part of my downloads.ini, it should be appreciated Smile
Code:

    (************************************)
    (* SECTION : Paths *)
    (* Paths options *)
    (************************************)



   (* The directory where temporary files should be put *)
 temp_directory = "/mnt/raid/temp"

   (* How often (in minutes) should MLDonkey scan all shared directories for new/removed files.
     Minimum 5, 0 to disable. Use command reshare to manually scan shares.
     When core starts, shared directories are scanned once, independent of this option. *)
   (* changing this option requires restart of MLDonkey core *)
 share_scan_interval = 70

   (* New download files are created with these rights (in octal) *)
 create_file_mode = 664

   (* New directories in incoming_directories are created with these rights (in octal) *)
 create_dir_mode = 755

   (* Create new files as sparse (not supported on FAT volumes) *)
 create_file_sparse = true

   (* Mininum free space in MB on temp_directory, minimum 50 *)
 hdd_temp_minfree = 50

   (* If true core shuts down when free space on temp dir is below hdd_temp_minfree,
     otherwise all downloads are paused and a warning email is sent. *)
 hdd_temp_stop_core = true

   (* Mininum free space in MB on core directory, minimum 20 *)
 hdd_coredir_minfree = 50

   (* If true core shuts down when free space on core dir is below hdd_coredir_minfree,
     otherwise all downloads are paused and a warning email is sent. *)
 hdd_coredir_stop_core = true

   (* Send a warning mail each <interval> hours for each directory, 0 to deactivate mail warnings. *)
 hdd_send_warning_interval = 1

   (* Use UTF-8 for filenames (instead of automatic locale detection). *)
 filenames_utf8 = true

   (*                 Incoming and shared directories.
      At least two entries have to be present here, one with strategy
      incoming_files and one with strategy incoming_directories.
      Both entries can point to the same directory.
      If one of the two strategies is missing, MLDonkey will create a default
      directory with its entry here.
      Finished BT multifile downloads are committed to the first directory
      with strategy incoming_directories. Other downloads are committed
      to the first directory with the strategy incoming_files.
      MLdonkey searches all shared_directories with incoming_* strategies
      on commit and uses the first one with enough free diskspace.
      Other strategies can be found in searches.ini, section customized_sharing. *)
 shared_directories = [
  {     dirname = "/mnt/raid/incoming/directories"
     strategy = incoming_directories
     priority = 0
};
  {     dirname = "/mnt/raid/incoming/files"
     strategy = incoming_files
     priority = 0
};
  {     dirname = shared
     strategy = all_files
     priority = 0
};]

note on / mnt / raid / Smile
Back to top
View user's profile Send private message
Petroska
neophyte


Joined: 08 Apr 2014
Posts: 8

PostPosted: Sat May 03, 2014 9:44 am    Post subject: Reply with quote

try to change all_files into incoming_files

the users dir is, in this case, not the complete path to the iomega, but download, fir example
Back to top
View user's profile Send private message
msuluhan
neophyte


Joined: 07 Mar 2011
Posts: 7

PostPosted: Thu May 08, 2014 6:41 pm    Post subject: Reply with quote

Hello testerprivate

Thanks it's working now Smile

I am so sorry for delayed update

Thanks again
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    MLDonkey Forum Index -> General Discussion All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Sourceforge.net Logo