MLDonkey :: View topic - Ports are not opened

FAQ

Memberlist

Usergroups

Profile

Ports are not opened

MLDonkey Forum Index -> Problems with MLDonkey Client (in general, and ed2k, kad, overnet)

View previous topic :: View next topic

Author

Message

ngs
neophyte

Joined: 14 May 2009
Posts: 1

Posted: Fri May 15, 2009 4:37 am Post subject: Ports are not opened

Hi, I installed Mldonkey 2.8.1 by using apt-get on Kuro-Box, Debian etch 2.6.25. I can search files and download them, but it's very slow. Torrents files are never completed. It seems that ports are not opened properly.

These are the results of potinfo, porttest, and id in the Sancho's console. Porttest seems not to be recognaized.

Quote:

Eval command: portinfo

--Portinfo--
Network| Port|Type
-------+------+-------------------
Core | 4080|http_port
Core | 4000|telnet_port
Core | 4001|gui_port
Donkey | 11665|client_port TCP
Donkey | 11669|client_port UDP

----------------------------------
Eval command: porttest

No such command porttest

----------------------------------
Eval command: id

For 38.107.164.21:4661 (muellbomber) ---> 11822440 (LowID)
For 38.107.164.6:4661 (Mules Donkeys and Blue Monkeys) ---> 8506115 (LowID)
For 129.47.150.6:4661 (DonkeyServer No1) ---> 770071 (LowID)
For 129.47.137.2:4500 (Billion Euro) ---> 13757859 (LowID)

And I keep getting the same massages.

Quote:

WARNING : Your 11665 port is not reachable. Please review your network config.
WARNING : You have a lowid. Please review your network config and/or your settings.

This is the result of the script of this page.

Quote:

Checking MLDonkey configuration files:

BitTorrent [Client] : ENABLED [TCP: 6882]
BitTorrent [Tracker] : ENABLED [TCP: 6881]
Direct Connect : DISABLED
eDonkey 2000 : ENABLED [TCP: 18355
9051
9241 / UDP: +4]
FastTrack : DISABLED
Gnutella : DISABLED
Gnutella2 : DISABLED
Open Napster : DISABLED
Overnet : WARNING No ports found in the file "/root/.mldonkey/donkey.ini"
SoulSeek : DISABLED

I also tried nmap.

Quote:

#nmap -v -sT localhost

Starting Nmap 4.11 ( http://www.insecure.org/nmap/ ) at 2009-05-15 13:04 JST
Initiating Connect() Scan against localhost (127.0.0.1) [1680 ports] at 13:04
Discovered open port 23/tcp on 127.0.0.1
Discovered open port 22/tcp on 127.0.0.1
Discovered open port 10000/tcp on 127.0.0.1
Discovered open port 111/tcp on 127.0.0.1
Discovered open port 4000/tcp on 127.0.0.1
Discovered open port 445/tcp on 127.0.0.1
Discovered open port 139/tcp on 127.0.0.1

I've used iptable's script introduced in this page.

And this is the result's of iptalbes -L

Quote:

# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination

Chain FORWARD (policy ACCEPT)
target prot opt source destination
ACCEPT tcp -- anywhere anywhere tcp dpt:9999
ACCEPT tcp -- anywhere anywhere tcp dpt:6882
ACCEPT udp -- anywhere anywhere udp dpt:5865
ACCEPT tcp -- anywhere anywhere tcp dpt:5865
ACCEPT udp -- anywhere anywhere udp dpt:8443
ACCEPT tcp -- anywhere anywhere tcp dpt:8443
ACCEPT udp -- anywhere anywhere udp dpt:4666
ACCEPT tcp -- anywhere anywhere tcp dpt:edonkey2000

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

I have set to forward ports on my router like this in the Virtual Server's section.

Quote:

eDonkey2000,Overnet,Mldonkey (the box's ipaddress) Both 4661-4672 / 4661-4672 always
KAD,KAD1 (the box's ipaddress) Both 4619 / 4629 always
Gnutella (the box's ipaddress) Both 6346-6347 / 6346-6347 always
FastTrack (the box's ipaddress) TCP 1214 / 1214 always
OpenNapster (the box's ipaddress) TCP 6699 / 6699 always
DirectConnect (the box's ipaddress) Both 1412 / 1412 always
Soulseek (the box's ipaddress) TCP 2234 / 2234 always
mldonkey (the box's ipaddress) Both 11665-11669 / 11665-11669 always

When I type "telnet (the box's ipaddress) 11665", from WAN side network using windows pc's command prompt, it shows a blank window, meaning the port is reachable. But when I try the other ports such as 4619, 1214. 2234 and so on, it says "Could not open connection to the host, on port blah blah: Connect failed"

I now suspect that I had to install with this method, not using apt-get. http://mldonkey.sourceforge.net/forums/viewtopic.php?t=4834

If anybody acknowleges to this kind of problem, your responses would be greatly appreciated.

Display posts from previous:

	MLDonkey Forum Index -> Problems with MLDonkey Client (in general, and ed2k, kad, overnet)	All times are GMT
Page 1 of 1

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum